What welding is
Welding joins pieces of metal (and some thermoplastics) by melting them together at the joint, often with a filler material added, so the parts become one continuous piece when the weld cools. Heat can come from an electric arc, a gas flame, electrical resistance, or a concentrated beam such as a laser. Some processes also use pressure.
This guide gives you the lay of the land: the main processes, the equipment they need, where welding is used, and where to read next.
The main welding processes
Stick welding (SMAW). An arc burns between a flux-coated consumable rod and the work. The coating produces shielding gas and slag. The equipment is simple and portable, and stick is commonly used outdoors and on thicker or less-than-clean steel.
MIG welding (GMAW). A solid wire is fed continuously through a gun while shielding gas protects the weld pool. It is widely seen as one of the easier processes to learn and is common in auto work, fabrication and general repair. See TIG vs MIG for a direct comparison.
Flux-cored welding (FCAW). Similar to MIG, but the wire is tubular and filled with flux. Some wires need external gas; “self-shielded” wires do not. It deposits metal quickly and tolerates wind better than gas-shielded MIG. The trade-offs are covered in flux-cored vs MIG.
TIG welding (GTAW). A non-consumable tungsten electrode makes the arc, shielding gas protects the weld, and filler rod is added by hand where needed. It offers fine control and clean welds on thin material, stainless steel and aluminum, but it is slower and takes more practice.
Oxy-fuel welding. A flame from burning a fuel gas (commonly acetylene) with oxygen melts the metal. It is also used for brazing, heating and cutting, and is less common for production welding today.
Submerged arc welding (SAW). The arc is buried under a blanket of granular flux, typically in automated setups for thick plate and long welds. Details are in how submerged arc welding works.
Resistance welding. Current passing through clamped metal heats the joint with no filler. Spot welding makes individual nuggets; seam welding uses rolling wheel electrodes to make a continuous or overlapping seam.
Other processes. Plasma arc, laser and electron beam welding are used mostly in industrial and high-precision settings.
Equipment you need
The core kit depends on the process, but most setups share these parts:
- Power source. A stick welder, MIG machine, TIG machine, or multi-process unit. Match it to the material thickness and the household or shop power available.
- Delivery hardware. An electrode holder (stick), a gun and wire feeder (MIG and flux-cored), or a torch (TIG).
- Work clamp (ground). Completes the circuit and needs a clean contact point on the workpiece.
- Consumables. Electrodes, wire, filler rod, tungsten, contact tips, nozzles.
- Shielding gas and regulator. For MIG, gas-shielded flux-cored and TIG. Gas choice depends on the process and metal.
- Personal protective equipment. A welding helmet with the correct shade, flame-resistant clothing, welding gloves, and closed leather footwear. Ventilation, and a respirator where fume exposure warrants it, matter too.
- Prep and finishing tools. An angle grinder, wire brushes, clamps, a chipping hammer for slag, and a square or fixture for fit-up. See how to prepare metal for welding.
How to choose a process
A few practical questions narrow the field quickly:
- What metal and thickness? Thin sheet and aluminum often point to MIG or TIG. Thick structural steel suits stick, flux-cored or SAW.
- Indoors or outdoors? Wind disturbs shielding gas, so stick or self-shielded flux-cored are often preferred outside.
- How clean is the material? Stick and flux-cored tolerate some rust and mill scale better than TIG.
- How much precision or speed do you need? TIG favors precision; MIG and flux-cored favor speed.
- Budget and portability? Stick machines are generally the most compact and affordable.
Many beginners start with MIG or stick, then add TIG later.
What welding is used for
Welding shows up in almost every sector that works with metal:
- Construction and infrastructure: steel frames, bridges, tanks and pipelines.
- Transportation: vehicle frames and bodies, ship hulls, rail equipment, aircraft components.
- Energy: pipelines, pressure vessels, power plant equipment, wind turbine structures.
- Manufacturing: machinery, tools, conveyors, appliances, furniture.
- Repair and maintenance: cracked parts, worn components (see hardfacing and reclamation welding and welding cast iron).
- Art and hobby work: sculpture, custom builds, restoration.
Types of welding work
Welding careers range widely. Common categories include shop fabrication, structural and field erection work, pipe welding, shipyard and marine work, aerospace work (often TIG on specialty alloys), maintenance and repair, and robotic welding operation. Inspection roles, such as certified welding inspector, evaluate welds rather than make them. Shop fabrication is often described as a gentler starting point than field work, though that varies by employer.
From design to finished weld
On engineered work, welding starts before the arc. In outline:
- Define what the part must do: loads, environment, code or standard requirements.
- Choose materials and a joint design (see the five basic weld joints).
- Select a process, filler and welding procedure.
- Prepare and fit up the parts.
- Weld, following the procedure.
- Inspect and, where required, test.
Hobby projects use a lighter version of the same idea.
Is welding hard? Is it well paid?
Basic welds are learnable with practice, but consistent, high-quality welds, especially in out-of-position work or with TIG, take sustained practice. Pay varies a lot with location, industry, certifications and the type of work, so check current local figures rather than relying on a general number.
Where to go next
- Comparing the two most popular beginner processes: TIG vs MIG
- Weighing wire options: flux-cored vs MIG
- Joint basics: the 5 basic weld types
- Before you strike an arc: preparing metal for welding
- Industrial processes: submerged arc, spot and seam welding