Start here
MIG and TIG Welding: How Gas-Shielded Arc Welding Works
MIG and TIG welding are gas-shielded arc processes. Learn how each works, how they differ, what gases and equipment they use, and which to choose.
Welding and Soldering Processes
Wire feed speed, shielding gas, tungsten choice and settings for gas-shielded arc welding.
Start here
MIG and TIG welding are gas-shielded arc processes. Learn how each works, how they differ, what gases and equipment they use, and which to choose.
Pick the right TIG tungsten: compare lanthanated, ceriated, zirconiated, pure and thoriated electrodes, color codes, diameters and tip preparation.
A beginner's guide to TIG welding aluminum: the machine, gas, tungsten and filler you need, cleaning, AC settings, and technique tips for a clean puddle.
Metal-cored arc welding (MCAW) uses a tubular wire filled with metal powder and shielding gas. Learn how it works, where it's used, and how it compares.
Compare MIG shielding gases for mild steel and beyond: C25 (75/25), 100% CO2, argon and other mixes, with flow rates and when each one makes sense.
WFS is wire feed speed, the setting that largely controls amperage and penetration in MIG welding. Learn how to set it, then balance it with voltage.
MIG weld porosity usually comes from poor gas coverage or contamination. Learn how to diagnose the cause and fix it, from gas flow and drafts to dirty metal.
How to TIG weld chrome-moly (4130) tubing: filler choices, tungsten and gas, prep, heat control and cooling, plus a note on chrome-plated parts.
Good MIG settings depend on metal thickness, wire size and gas. See starting wire feed speed and voltage ranges for mild steel and how to fine-tune them.
2T and 4T are TIG torch switch modes. Learn how each sequence works, when to use 2T versus 4T, and how they compare with using a foot pedal.
Related topics