Start here
Welding Processes and Equipment: A Beginner's Guide
A beginner's overview of the main welding processes, the equipment each one needs, what welding is used for, and how to pick a process to learn first.
Welding and Soldering Processes
An overview of welding methods, from flux-cored and submerged arc to spot, seam and hardfacing work.
Start here
A beginner's overview of the main welding processes, the equipment each one needs, what welding is used for, and how to pick a process to learn first.
Flux-cored and MIG welding use similar machines but different wires and shielding. See how they compare on thickness, wind, cleanliness, cost and skill.
How hardfacing and reclamation welding restore worn parts: what each term means, which processes (including MIG) are used, and how to avoid cracking.
Prepare metal for welding by removing oil, rust, paint and scale, grinding to bright metal, and fitting the joint tightly. Includes tips by metal type.
Resistance spot welding joins overlapping sheet metal with a short, high current pulse and electrode pressure. Learn the cycle, equipment, limits and uses.
Methods for welding cast iron and higher-carbon steels: filler and rod choices, preheat, peening and slow cooling, plus joining 1045 to 1018 steel.
Learn what seam welding is, how rotating wheel electrodes make continuous leak-tight joints in sheet metal, and where the process is used and limited.
Submerged arc welding buries the arc under granular flux for deep, fast welds on thick steel. Learn how SAW works, its equipment, limits and typical uses.
The five basic weld joints are butt, lap, corner, tee and edge. Learn how each is used, the weld types that go on them, and five common processes.
TIG uses a non-consumable tungsten electrode and hand-fed filler; MIG feeds a consumable wire through a gun. Compare speed, skill, cost and best uses.
Related topics