What a seam weld is
“Seam welding” is used in two slightly different ways. In the narrow, industrial sense it names a resistance welding process that produces a continuous (or closely overlapping) weld along a joint, usually in thin sheet metal, so the joint can be leak-tight. In everyday shop talk, a “seam weld” can also mean any continuous weld bead run along a seam, made with MIG, TIG, laser or another process, as opposed to short intermittent welds.
This article focuses on the resistance process, since that is what most searchers and manufacturers mean, and touches on the broader usage near the end.
How resistance seam welding works
Seam welding is closely related to resistance spot welding. Instead of a pair of stationary pointed electrodes, it uses one or two rotating wheel-shaped electrodes, typically copper alloy.
- Overlapping sheets, usually in a lap joint, are fed between the wheels.
- The wheels clamp the sheets under pressure and drive.
- Electrical current passes through the stack. Resistance at the interface generates heat and melts the metal in a small zone.
- As the wheels roll, current is applied in pulses (or continuously), forming a line of nuggets that overlap into a sealed seam.
No filler metal or shielding gas is normally needed. The work is either moved past the wheels or the wheels move along the work.
Seam, roll-spot and stitch: what’s the difference
- Continuous or overlapping seam. Nuggets overlap so the weld is gas- or liquid-tight. This is the type chosen when sealing matters.
- Roll-spot. Nuggets are spaced apart. It is faster and uses less energy, but the result is not leak-tight.
- Stitch. The term is used loosely: in arc welding, stitch welding means short welds with gaps between them, which is a different thing from a sealed seam.
Process variables
Quality depends on how several settings work together. Exact values depend on the material, thickness and coating, and are set from procedure data or trial welds:
- Welding current and its pulse timing
- Wheel force
- Travel speed
- Wheel width, shape and condition
- Material and surface condition, including coatings
Wheels wear and pick up contamination, so they are dressed or replaced on a schedule. Cooling of the wheels is common in production machines.
Where seam welding is used
Seam welding suits parts that must hold liquid or gas or resist leakage:
- Fuel tanks and mufflers in automotive manufacturing
- Drums and steel containers
- Radiators and heat exchanger components
- Sheet metal tanks and enclosures
Advantages and limits
Advantages:
- Can produce sealed joints
- No filler or flux in the resistance process
- Fast and easily automated
- Consistent results once parameters are set
Limits:
- Best for thin sheet; thicker material is generally better handled by other processes
- Joint paths are generally straight or gently curved
- Needs overlapping access for the wheels on both sides, and equipment is costly compared with hobby-level welders
- Coated materials can need parameter changes and extra electrode upkeep
When to use a seam weld
Choose a seam (continuous) weld when the joint needs to seal, when appearance or strength along the whole length matters, or when an intermittent weld would leave gaps where moisture or corrosion could creep in. Choose intermittent welds when you want less heat input and less distortion and sealing is not required.
Related questions
Can you seam weld a vehicle subframe? Rules about modifying or repairing structural vehicle parts differ by region and may involve inspection or approval. Because a subframe is safety-critical, check your local requirements and involve a qualified professional rather than assuming a repair is acceptable.
What type of welding is used on pipelines? Pipeline welding is typically done with arc processes, such as stick welding and mechanized gas-shielded wire processes, to qualified procedures. It is a different practice from resistance seam welding of sheet. For a wider look at arc processes, see welding processes and equipment.