Pipe Welding

What type of welding do pipe welders use?

Pipe welders mainly use stick (SMAW) and TIG (GTAW), with MIG, flux-cored, submerged arc and orbital welding for some jobs. See which process fits where.

On this page
  1. Short answer
  2. Stick welding (SMAW)
  3. TIG welding (GTAW)
  4. MIG welding (GMAW)
  5. Flux-cored welding (FCAW)
  6. Submerged arc and orbital welding
  7. Which process for which job
  8. Which to learn first

Short answer

Pipe welders do not use one single type of welding. Pipe welding is a specialized application of arc welding, and the process depends on the job. The two most commonly associated with pipe work are stick welding (SMAW) and TIG welding (GTAW). Others, such as MIG (GMAW), flux-cored (FCAW) and submerged arc (SAW), are used in particular situations, along with mechanized and orbital systems.

Stick welding (SMAW)

Stick welding uses a flux-coated electrode. It has long been a standard process for field pipe work, pipelines and plant repairs.

  • Strengths: The equipment is simple and portable, it can be used outdoors in wind, and it tolerates less-than-perfect surfaces better than some other processes.
  • Typical electrodes: E6010 (or similar cellulosic types) for the root pass and often hot pass, and E7018 for fill and cap passes. See can you use 7018 for a root pass? for why the choice matters.
  • Limits: It stops for electrode changes and slag removal, and deposition is slower than with wire processes.

TIG welding (GTAW)

TIG uses a non-consumable tungsten electrode, with filler rod added by hand and inert gas shielding.

  • Strengths: Very precise and clean. It is widely used for root passes on pipe where quality is critical, and it is the usual choice for thin wall, stainless steel and alloy pipe.
  • Typical uses: High-purity and high-pressure piping, food and pharmaceutical systems, power plants, and many test coupons.
  • Limits: It is slower and takes more skill. Wind disturbs the shielding gas, so outdoor work needs shielding from drafts.

For material-specific notes, see welding stainless, nickel alloy and clad pipe.

MIG welding (GMAW)

MIG feeds a continuous wire electrode with shielding gas.

  • Strengths: Fast, with high deposition rates and no slag to chip.
  • Typical uses: Shop fabrication and mechanized setups. Modified short-circuit processes, such as those marketed as STT or RMD, are used for root passes on some pipe.
  • Limits: Gas shielding is vulnerable to wind, and standard short-circuit MIG can be prone to lack of fusion if the technique or settings are poor, so some codes or procedures restrict it.

Flux-cored welding (FCAW)

Flux-cored wire carries its own flux. Some wires are self-shielded, with no external gas, and others use shielding gas.

  • Strengths: High deposition rates, good for thicker pipe, and self-shielded wires work better in wind than MIG.
  • Typical uses: Fill and cap passes on heavy pipe, structural piping and some pipeline work.
  • Limits: It produces slag and more smoke, and the roots on open-root pipe are normally done with another process.

Submerged arc and orbital welding

  • Submerged arc welding (SAW): An arc is buried under granular flux. It deposits metal quickly and is used on heavy wall and in pipe mills or fabrication shops where the joint can be positioned for mechanized welding.
  • Orbital welding: A weld head travels around the pipe or tube automatically, typically using TIG. It is common in sanitary, semiconductor and other high-purity systems, where weld quality has to be very consistent.
  • Mechanized pipeline welding: Large pipeline projects often use automated or semi-automated systems for productivity and quality.

Which process for which job

Situation Commonly used
Outdoor field welds on carbon steel Stick, sometimes self-shielded flux-cored
Critical roots, thin wall, stainless and alloys TIG
Shop fabrication, high volume MIG or flux-cored, sometimes SAW
High-purity or sanitary tube Orbital TIG or manual TIG
Long, straight pipeline Stick and mechanized processes

These are typical patterns and not rules. The code, the material and the customer’s WPS decide what is used on a given project. For how these processes fit into each stage of a joint, see the pipe welding process from root to cap.

Which to learn first

Many welders and instructors suggest starting with stick and TIG, since they are the most commonly tested for pipe and they teach puddle control. MIG and flux-cored are usually easier to pick up and can be learned afterward, particularly for shop work. Then, if you plan to take a certification test, find out which process your employer or test body uses. The 6G pipe welding test is commonly done with stick or TIG.

The complete guide to pipe welding

Pipe Welding Process: Root, Hot, Fill and Cap Passes
Read the guide

Keep exploring

Guides from other topics

All topics →