Shop Setup and Safety

What safety equipment is needed for welding?

A checklist of welding safety equipment by body area: helmet, glasses, respirator, gloves, flame-resistant clothing, boots, hearing and workspace protection.

On this page
  1. Short answer
  2. Eyes and face
  3. Respiratory protection
  4. Hands
  5. Body
  6. Feet
  7. Hearing
  8. Workspace and fire safety
  9. Where to start

Short answer

At minimum, welders need eye and face protection (a welding helmet with the right filter lens plus safety glasses), gloves made for welding, flame-resistant clothing that covers the skin, sturdy leather footwear, and a plan for fumes, which may include ventilation and a respirator. Hearing protection and workspace protection such as screens and a fire extinguisher round out the list. Requirements vary by process, material and location, so check your employer’s rules, local regulations and your equipment’s manuals.

Eyes and face

  • Welding helmet. Fitted with a filter lens that blocks harmful ultraviolet and infrared light and reduces visible brightness. Fixed-shade and auto-darkening lenses are both used. The shade needed depends on the process and current, so check the lens manufacturer’s chart or applicable standard.
  • Safety glasses. Wear safety glasses (ideally marked to a recognised impact standard such as ANSI Z87.1 in the US) under the helmet, because chipping and grinding happen with the helmet raised.
  • Face shield. Useful for grinding and cutting, often worn with safety glasses.

For why this matters, see welding arc safety.

Respiratory protection

Welding fume contains particles and gases that should not be inhaled. Good ventilation or local extraction comes first; a respirator is used when those are not enough or not possible. Options include filtering respirators with particulate filters and powered air-purifying respirators (PAPRs). Fit, filter type and suitability depend on the material being welded, so follow the guidance for your situation. Learn more in welding shop ventilation and fume extraction basics and how long does it take to get welder’s lungs.

Hands

Use gloves designed for welding. Thicker, insulated leather gauntlet gloves are typically used for stick, MIG and cutting, where there is more heat and spatter. Thinner, more flexible leather gloves are common for TIG, where finger control matters. Keep gloves dry, and replace them when worn through.

Body

  • Jacket or sleeves. Flame-resistant cotton, wool, or leather protects arms and torso from spatter and ultraviolet radiation.
  • Pants. Flame-resistant or heavy natural-fibre work pants, worn over the boots and without cuffs, which can catch sparks.
  • Apron. Leather aprons add protection for heavy work.
  • Avoid synthetics. Materials such as polyester can melt onto skin. Do not wear clothing soaked in oil, solvent or other flammables.
  • Cover skin. Buttoned collars and long sleeves help reduce UV burns.

Feet

Leather work boots with sturdy soles, preferably with toe protection, and with pants worn over the tops so sparks cannot fall in.

Hearing

Welding is not always loud, but grinding, chipping and cutting often are. Wear earplugs or earmuffs as needed, and use flame-resistant types or keep sparks away from foam plugs in overhead work.

Workspace and fire safety

Where to start

If you are buying piece by piece, get the helmet, safety glasses, gloves and flame-resistant clothing first, then boots and respiratory protection. For the equipment that goes alongside the protective gear, see setting up a welding shop.

The complete guide to shop setup and safety

Setting Up a Welding Shop: Equipment and Machine Parts
Read the guide

Keep exploring

Guides from other topics

All topics →