Shop Setup and Safety

How long does it take to get welders' lungs?

Welder's lung has no fixed timeline. Learn what the term means, what affects risk, how metal fume fever differs, and how to reduce exposure to welding fume.

On this page
  1. Short answer
  2. What “welder’s lung” means
  3. What affects timing and risk
  4. Metal fume fever is different
  5. Symptoms and when to get advice
  6. Prevention

This article is general information only and is not medical advice. If you have breathing symptoms or health concerns, speak to a doctor or occupational health professional.

Short answer

There is no fixed timeline. “Welder’s lung” is not a single, precisely defined condition, and the time it takes for lung problems to appear depends on how much fume a person breathes, over how long, and what is in it. Reports describe long-term conditions developing over years of repeated exposure, though some cases have been reported after shorter, heavy exposure. Nobody can give a reliable number of months or years that applies to everyone.

What “welder’s lung” means

People use “welder’s lung” loosely. It is sometimes used for siderosis, a build-up of iron particles in the lungs from inhaling iron-containing fume and dust, which often shows up on imaging and may cause few symptoms by itself. It is also used more broadly for chronic breathing problems seen in people exposed to welding fume over time, such as bronchitis and other lung conditions. Because welding fume varies with the metal, filler and process, the health effects differ too.

What affects timing and risk

  • How much and how long. Frequent, long-term exposure, particularly in enclosed or poorly ventilated spaces, tends to carry greater risk.
  • Materials and coatings. Stainless steel, galvanized or coated steel, and some filler metals produce different fumes and gases, and some are more hazardous than others.
  • Process. Some welding processes produce more fume than others.
  • Controls. Ventilation, extraction near the arc and respiratory protection can reduce exposure substantially.
  • Other factors. Smoking, existing lung conditions and other workplace dusts can add to the load.

Metal fume fever is different

Metal fume fever is a short-term, flu-like illness that can follow breathing certain metal fumes, such as those from heated zinc in galvanized steel. Symptoms usually start within hours of exposure and tend to clear within a day or two. It is not the same as long-term lung damage, but it is a sign you were exposed to fume you should have avoided. Do not assume you are safe because you have no immediate effects.

Symptoms and when to get advice

Possible symptoms of lung irritation or disease include a persistent cough, phlegm, wheezing, shortness of breath and chest tightness. Get medical advice if you notice these, especially if they are ongoing, if you have a welding job, or if you are exposed to fume regularly. Tell your doctor that you weld and what materials you work with.

Prevention

The best approach is to keep fume away from your breathing zone in the first place:

  1. Ventilation and extraction. Use local extraction at the arc, and keep your head out of the plume. See welding shop ventilation and fume extraction basics.
  2. Respiratory protection. When controls are not enough, use a suitable respirator that fits you properly. See what safety equipment is needed for welding.
  3. Prepare the metal. Remove paint, coatings and oils from the weld area where practical, and take extra precautions with galvanized or unknown materials.
  4. Avoid enclosed spaces unless proper ventilation and procedures are in place.
  5. Keep the shop clean. Dust and grinding debris can add to airborne particles.

For the bigger picture of planning a safe shop, see setting up a welding shop.

The complete guide to shop setup and safety

Setting Up a Welding Shop: Equipment and Machine Parts
Read the guide

Keep exploring

Guides from other topics

All topics →