Shop Setup and Safety

Welding Arc Safety: Looking at Welding, Bystanders and Wet Conditions

Arc eye, protecting bystanders and welding in wet conditions: what happens if you look at a welding arc, how to shield others, and why wet metal is risky.

On this page
  1. Looking at a welding arc
  2. People working near a welding operation
  3. Welding wet metal and damp conditions
  4. Two common questions
  5. Quick checklist

This article is general information, not medical or safety-certification advice. Follow your employer’s rules, the equipment manuals and local regulations.

Looking at a welding arc

A welding arc gives off intense visible light along with ultraviolet (UV) and infrared radiation. Looking at it without proper eye protection can cause arc eye, also called welder’s flash or photokeratitis. It is effectively a UV burn on the surface of the eye.

What it feels like

Symptoms commonly show up several hours after exposure, often described as roughly 6 to 12 hours, which is why people sometimes feel fine until the middle of the night. They can include:

  • Pain or a gritty, sandy feeling in the eyes
  • Watering and redness
  • Sensitivity to light
  • Blurred vision

Arc eye is usually temporary and often settles within a day or two, but it is painful. If symptoms are severe, last longer or you have any worry about vision, get medical advice rather than waiting.

How far away can you look at someone welding?

There is no distance that can be called universally safe. Risk depends on the process, current, how long you look, and whether there is reflection from nearby surfaces. A brief accidental glance from a distance is generally less likely to cause lasting harm than staring, but it can still cause discomfort. The safest habit is not to look at the arc at all without a proper welding filter lens, and to look away if you see a flash.

People working near a welding operation

A common training question reads: “When other workers are working near a welding operation, the standard practice is to ____.” The usual answer is that they should be protected from the arc by screens, curtains or shields (and be warned that welding is under way). Practical steps include:

  • Set up welding-rated screens or curtains around the work area. See welding booth plans and safe work surfaces.
  • Tell nearby people before you start, and use signs or markings if the area is shared.
  • Make sure anyone close to the work wears safety glasses with side protection at least, and follows the site rules for eye protection.
  • Keep walkways clear and out of the line of sight of the arc.
  • Think about reflected light from shiny surfaces and light-coloured walls.
  • Consider fumes as well as light. See welding shop ventilation and fume extraction basics.

Protective gear for the welder is covered in what safety equipment is needed for welding.

Arc welding is also called shielded metal arc welding (SMAW) or stick welding, though arc welding is a broader family that includes MIG and TIG.

Welding wet metal and damp conditions

Welding on wet metal or in wet conditions is not recommended. The main concerns are:

  • Electric shock. Water, sweat-soaked gloves, damp boots and wet floors lower electrical resistance, making a shock more likely and more dangerous.
  • Poor weld quality. Moisture can introduce hydrogen into the weld, which can contribute to porosity and cracking, and may cause spatter and an unstable arc.
  • Equipment damage. Water around the machine, cables and connections can cause faults.

Can you weld if the metal is wet?

Some welders do strike an arc on damp steel in repair situations, particularly with stick electrodes, but it is not good practice. The safer option is to stop, dry the surface and the area, and restart under dry conditions. Drying the joint may involve wiping it down or gently warming it, and you should be cautious with open flames near the work.

Can you weld in standing water?

No. Do not weld while standing in water or on wet ground. If you must work in damp conditions, stand on dry insulating material, wear dry gloves and boots, keep cables out of puddles and check cable insulation for damage. Specialised underwater welding is done by trained professionals with dedicated equipment and is not something to attempt at home.

What happens if you weld with no ground?

The welding circuit needs a path back to the machine through the work clamp. Without a good connection to the work, you may not get a proper arc, and current may find an unintended path, for example through cables, bearings or equipment. That can cause arcing damage and creates safety hazards. Always clamp to clean, bare metal on the workpiece or the table, and check the clamp regularly.

Two common questions

Why do welders drink milk after welding? It is a long-standing habit among some welders, and the idea is that it helps with fume effects. There is no good evidence that milk protects against the effects of welding fumes. Ventilation and respiratory protection are what help. See how long does it take to get welder’s lungs.

Is welding smoke worse than cigarette smoke? They are different hazards and cannot easily be compared. Welding fume can contain metals and gases that are harmful to breathe, depending on the materials and the process, so it should be controlled with ventilation and, where necessary, a respirator.

Quick checklist

  • Wear a helmet with the correct filter lens, and safety glasses beneath it
  • Screen off the work area from others
  • Keep the area, gloves, boots and cables dry
  • Clamp the work lead to clean bare metal
  • Ventilate, and keep fire protection close at hand

The complete guide to shop setup and safety

Setting Up a Welding Shop: Equipment and Machine Parts
Read the guide

Keep exploring

Guides from other topics

All topics →