This article gives general information. Workplace limits, standards and rules vary by location. For employees or commercial shops, follow the applicable occupational health regulations and consider asking a qualified industrial hygienist.
Why ventilation matters
Welding creates fume, which is a mix of tiny metal particles, and gases such as ozone and nitrogen oxides, along with gases from shielding gas and coatings. Breathing it is a health risk, which is explained in how long does it take to get welder’s lungs. The aim of ventilation is to keep fume away from your breathing zone, which is the air around your nose and mouth when you bend over the work.
General ventilation vs local exhaust
- General (dilution) ventilation moves air through the whole space, with fans, open doors and windows. It dilutes fume but does not remove it from near your face. Fume plumes rise past your helmet, so a room fan alone may not be enough.
- Local exhaust ventilation captures fume at or near the arc, before it reaches the breathing zone. It is generally considered the more effective approach and is commonly recommended as the first choice where practical.
Most shops use both: local extraction at the arc, and general ventilation to replace the air that is removed and clear any leftover fume.
Local extraction options
- Fume extraction arm or flexible hose with a hood. Positioned close to the weld and moved as you work. Capture drops off quickly with distance, so keep the hood close without disturbing the shielding gas.
- Torch-mounted extraction (MIG fume guns). Capture fume at the gun, which is useful when you cannot reposition a hood often.
- Downdraft or side-draft benches. Pull air across or through the table. They suit smaller parts and grinding.
- Overhead hoods. Useful in booths, but plumes can pass your face before reaching the hood, so they depend on the work position.
- Portable units with filters. Handy for hobby shops. Filters need replacing or cleaning as directed.
Fume extractors should either exhaust to the outside or filter the air with suitable filters. Check what a unit is designed for before using it with unfamiliar materials.
Make-up air and the outdoors
Whatever is exhausted must be replaced. Without a way for fresh air to get in, extraction fans work poorly, and in cold weather you may draw cold air through gaps. Provide make-up air with an open door or vent, placed so that clean air flows across you toward the fume source rather than fume being drawn past you.
Keep the exhaust point away from windows, doors and intakes, and away from neighbours.
Shielding gas can be disturbed by strong draughts, which may cause porosity in MIG and TIG welds. Position fans so they do not blow directly across the arc, while still moving the air.
Practical steps for a home or garage shop
- Weld near an open garage door, and keep the fume moving away from you
- Position your head out of the plume, and avoid leaning over the arc
- Use a fume extractor or a hood connected to a suitable exhaust fan
- Keep other people out of the area, and use screens. See welding booth plans and safe work surfaces
- Avoid welding in closed rooms, basements or confined spaces without proper ventilation
- Weld, grind and sand in separate zones so dust does not spread
- Do not use a fan that could blow sparks toward combustible material
Materials that need extra care
Some materials and coatings produce more hazardous fume, including galvanized or zinc-coated steel, stainless steel, painted or plated surfaces, and metals with cadmium or lead coatings. Remove coatings from the weld zone where practical, check labels and safety data, and get specific advice before welding unfamiliar materials.
Never weld on containers that held flammable or unknown substances.
When ventilation is not enough
If you cannot reduce exposure enough, or you work in tight spaces, add respiratory protection. Choose a respirator suitable for welding fume, fitted properly. See what safety equipment is needed for welding. A respirator should back up ventilation rather than replace it.
Checking your setup
Signs your ventilation may be inadequate include visible fume hanging in the room, a metallic taste, irritated eyes or throat, headaches or coughing. Smoke visible near your face is a clear sign to adjust. If you want measurements, a qualified professional can sample air quality.
For the rest of the planning, see setting up a welding shop. If you run an extraction unit or fans, also consider their load when wiring your shop.