What a welding booth is
A welding booth is a defined, partly enclosed area where welding is done. Its purposes are to contain sparks and spatter, shield other people from arc light, and keep welding away from combustible materials. In a school or industrial setting it may be a steel-framed stall with a bench and exhaust. At home it can be as simple as a corner of the garage fenced off with welding screens.
Basic booth layout
Whatever the size, a good booth usually considers the same points:
- Non-combustible surroundings. Walls, screens and flooring near the arc should not burn. Sparks can travel some distance, so keep the area clear of paper, rags, solvents, wood and other fuel.
- Arc shielding. Welding-rated screens or curtains help block arc light so nearby people are not exposed. See welding arc safety.
- Ventilation. Plan where fumes will go before you build. Local extraction near the arc is generally more effective than relying on general airflow alone. See welding shop ventilation and fume extraction basics.
- Lighting. Good general lighting helps you set up, grind and inspect work when your helmet is up.
- Power and cable reach. Put the welder where cables will not cross walkways. See wiring a home welding shop.
- Dry floor. Keep the floor dry and clear. Wet conditions raise shock risk, which is covered in the same safety article above.
- Fire extinguisher and exit access. Keep an extinguisher within reach and the way out unobstructed.
Plan options
- Curtain or screen booth. Freestanding frames with flame-resistant welding curtains are flexible and easy to move. Choose products sold specifically for welding.
- Steel-frame booth. A frame built from steel tube with sheet steel or welding curtain panels is sturdier and can be built with the welding skills you are developing.
- Portable screens. Folding screens suit people who share a space or only weld occasionally.
Leave a gap at the bottom or use ventilated panels so air can move, but do not leave openings that let the arc glare into walkways.
Safe work surfaces
A welding table should be steel and flat, since the work clamp needs good electrical contact and the surface needs to withstand heat and spatter. For sizing, see what is the ideal size for a welding table. If you plan to build repeat parts, a slotted or drilled table pairs well with welding jigs and fixtures.
Under and around the table, use non-combustible flooring such as bare concrete. Avoid vinyl and carpet near the arc.
Can you weld on plywood?
Welding on plywood, a wooden workbench or any other wood surface is not advisable. Hot spatter and heated metal can ignite wood, and fires can smoulder and start after you leave. Plywood also offers no good electrical path, so the work clamp must still connect to bare metal, and the glue and finishes in plywood can give off smoke when heated.
If you only have a wooden bench:
- Move the job to a steel table or onto a non-combustible surface such as a steel sheet resting on concrete
- Do not rely on a thin sheet of metal on top of wood, because heat can conduct through it
- Clear flammable material from the area and keep a fire extinguisher nearby
- Watch the area for some time after you finish welding
If you are welding near a wooden subfloor or structure, such as a repair on site, get proper fire protection advice first. Fire-resistant welding blankets exist, but they have limits, and the safest choice is often to move the work.
Wood itself cannot be welded. Welding joins metals, or in some cases plastics, by melting them.
Cost and next steps
A simple curtain booth can be inexpensive, while a steel-framed booth with extraction costs more. Costs vary widely with your region and the materials you choose, so price the parts before settling on a plan. Start with the layout, then equipment, as described in setting up a welding shop.