Projects and Repairs

Welding as an Art Form: Metal Sculpture Basics

Get started with welded metal art: materials, tools, techniques, finishing, starter craft ideas, and what to know before trying to weld aluminum soda cans.

On this page
  1. Why welding works as an art form
  2. Materials and tools for sculpture
  3. Techniques
  4. Starter metal craft ideas
  5. Finishing and protecting sculptures
  6. Welding aluminum cans

Why welding works as an art form

Welding is a fast way to turn scrap into three-dimensional shapes. Unlike carving, you build up from pieces. Unlike casting, you can change your mind and cut something off. Many welded sculptors work with found objects such as chain, gears, tools, rebar and offcuts, and join them with simple tacks and fillet welds. Welds can be hidden by grinding or left visible as part of the look.

Materials and tools for sculpture

  • Mild steel is the usual starting material: cheap, easy to weld, and readily available as bar, tube, plate and scrap. It rusts, which some artists use as a deliberate finish.
  • Stainless steel resists rust but needs more care to avoid discoloration and distortion.
  • Aluminum is light but harder to weld, and often needs a TIG welder or a MIG welder with a spool gun and argon.
  • Welder: MIG is the easiest to learn for sculpture. Stick is cheaper and works on rough pieces. TIG gives the most control and the cleanest welds on thin material.
  • Cutting and shaping: angle grinder, chop saw or hacksaw, hammer, vise and anvil, and optionally a plasma cutter or oxy-fuel torch.
  • Layout tools: clamps, welding magnets, square, tape measure and soapstone or a scribe.
  • Safety gear: auto-darkening helmet, gloves, flame-resistant clothing, eye protection and a respirator or good ventilation, especially when grinding or welding coated metal.

Techniques

  • Tack, then check. Tack pieces together first so you can adjust the pose before committing to full welds.
  • Mind your joints. The basic joints are butt, lap, tee, corner and edge. Most sculpture uses fillet welds on tee and lap joints.
  • Stacked beads and texture. Laying many small beads builds a rough surface. Some artists weld over a form to create texture.
  • Grinding and blending. A flap disc smooths welds when you want the joint to disappear.
  • Heat control. Thin material warps. Use short welds, skip around the piece, and let it cool.
  • Strength where it counts. A sculpture that stands outside or holds weight needs sound welds and a solid base. Weld bases and legs fully, and test stability before moving it into place.

On strength, arc welding is a broad category that includes stick, MIG and TIG. Strength depends mostly on how well the weld is done, the joint design and the base metal rather than on the process alone.

Starter metal craft ideas

Ten examples of small welded crafts you can make from scrap:

  1. Horseshoe or nail figures
  2. Garden stakes and flowers from rebar or rod
  3. Candle holders
  4. Coat and key hooks
  5. Wall art from cut plate
  6. Bottle trees and plant hangers
  7. Wind spinners
  8. Animal figures from bolts, nuts and gears
  9. Small tables with decorative bases
  10. Yard signs cut from sheet steel

Welded work usually fits within the visual arts, which are traditionally grouped by many sources into painting, sculpture, architecture and others. The exact “seven forms of art” list varies between sources; welded sculpture sits within sculpture.

For more starter builds, see welding project ideas.

Finishing and protecting sculptures

  • Remove spatter and sharp edges with a grinder or file.
  • Clean off oil and mill scale.
  • For outdoor pieces, use a primer and paint, a clear coat, wax, or a deliberate rust patina sealed with a clear finish.
  • Galvanized or powder-coated finishes can be applied by a shop, though you should tell them the piece was welded.
  • Avoid welding on pieces that are already galvanized without grinding off the coating and ventilating well.

Welding aluminum cans

Welding beverage cans is a popular challenge video and forum topic, and it is mostly a skill demonstration rather than a practical project.

What are cans made of? Most soda and beer cans are made of thin aluminum alloy, and many have an internal polymer lining and exterior paint or coating. Some drinks are sold in steel cans; a magnet will tell you which you have. Steel food cans are sometimes called “tin” cans, but they are steel with a thin tin coating, and welding them is a different matter from welding aluminum.

Do you need argon? To weld aluminum with TIG or MIG you generally use argon shielding gas, not CO2. Aluminum also needs different technique, and for TIG, AC output, because of its surface oxide. See how to TIG aluminum for beginners.

What makes cans hard:

  • The walls are extremely thin, so it is easy to blow holes through them.
  • The lining and paint burn and smoke. Clean or grind off coatings in the weld area and ventilate well.
  • Any residue in the can adds a fire and fume risk. Rinse and dry them fully.
  • Very low amperage and careful control are needed. Many people say a TIG welder with fine control is the practical choice.

Cans are also commonly crafted into sculptures with other methods such as crimping, glue or solder, which are easier than welding. If you want to try welding aluminum on something more forgiving first, see repairing aluminum.

The complete guide to projects and repairs

Welding Project Ideas for Beginners and Hobbyists
Read the guide

Keep exploring

Guides from other topics

All topics →