Projects and Repairs

How to join dissimilar metals?

Learn how to join dissimilar metals using welding, brazing, soldering, adhesives or fasteners, plus common pairings and how to avoid galvanic corrosion.

On this page
  1. Short answer
  2. What can go wrong
  3. Method options
  4. Common pairings
  5. Preventing galvanic corrosion
  6. Choosing a method

Short answer

Joining dissimilar metals means choosing a method that copes with differences in melting point, thermal expansion and corrosion behavior. Some pairs can be fusion welded with the right filler metal (for example, mild steel to stainless steel). Others, such as aluminum to steel, are poorly suited to ordinary arc welding and are usually joined by mechanical fasteners, adhesives, brazing or special transition pieces. The best method depends on the exact alloys, the thickness, the joint design and the environment and load.

What can go wrong

  • Galvanic corrosion. When two different metals touch in the presence of moisture or another electrolyte, the more reactive (anodic) metal can corrode faster. This is a bigger risk outdoors, in marine settings and in damp locations.
  • Brittle intermetallic compounds. Melting some metal pairs together, such as aluminum and steel, forms brittle phases in the weld that crack under load.
  • Different melting points. If one metal melts far below the other, fusion welding the pair is awkward.
  • Different expansion and conductivity. Metals that heat and expand differently, or that move heat away at different rates (copper conducts heat much faster than steel), cause distortion, residual stress and uneven heating.

Method options

Mechanical fastening. Bolts, rivets and clinching avoid the metallurgy problems entirely. The drawbacks are stress concentrations at the holes and the need to isolate the metals from each other to prevent galvanic corrosion.

Adhesive bonding. Structural adhesives spread load over an area and can also act as an insulating layer between metals. They have temperature limits and need careful surface prep. See whether J-B Weld is as strong as a weld for the limits of epoxy.

Brazing and soldering. These join metals using a filler that melts below the base metals’ melting points, so the base metals are not melted. This reduces distortion and avoids many brittle-phase problems, and it works for many pairs, such as copper to steel or brass to steel. Soldering uses lower-temperature fillers and is best for electrical joints, plumbing and light-duty work. Brazing is stronger and used for more demanding joints. See torch brazing and bronze welding and soldering tools and materials.

Fusion welding with a compatible filler. MIG, TIG and stick can work when the metals are metallurgically compatible or the filler bridges them. Common examples are 309L filler for mild steel to stainless, and silicon bronze for some copper, brass and steel combinations.

Solid-state and special processes. Friction welding, friction stir welding, ultrasonic welding and explosion bonding join metals without fully melting them and are used industrially, including for aluminum-to-steel transitions. They are generally not hobby-shop methods.

Common pairings

  • Mild steel to stainless steel. Commonly welded with an over-alloyed filler such as 309L. Using standard mild steel filler or 308 stainless filler may give a weaker or more crack-prone joint. Check the filler maker’s recommendation for your specific grades.
  • Aluminum to steel. Do not expect to simply arc weld these together. Options include bolts or rivets with isolation, adhesive bonding, or a commercially made bimetallic transition insert. See repairing aluminum for aluminum-specific notes.
  • Copper or brass to steel. Brazing or silicon bronze fillers are common. Copper’s high thermal conductivity means it needs more heat input than you might expect.
  • Cast iron to steel. Cast iron is sensitive to cracking. Brazing, or nickel-based fillers with preheat and slow cooling, are commonly used. Success depends a lot on the type of cast iron. See methods of welding cast iron.
  • Galvanized to bare steel. Not truly dissimilar, but zinc coating must be removed from the weld area and the work ventilated well, as zinc fumes are hazardous (see welding shop ventilation and fume extraction).

Preventing galvanic corrosion

  • Insulate the metals from each other with plastic or rubber washers, sleeves, gaskets or coatings.
  • Keep moisture out with sealant or paint, and coat both metals near the joint, not just the more noble one.
  • Pick pairs that are close together on the galvanic series where you can.
  • Avoid a small piece of the more noble metal attached to a large piece of the more reactive one if you can.
  • Plan for inspection and replacement of sacrificial or vulnerable parts.

Choosing a method

  1. Identify both metals exactly, not just “steel” or “aluminum”.
  2. Decide whether the joint is structural, pressure-bearing, electrical or just cosmetic.
  3. Consider the environment (moisture, heat, vibration, chemical exposure).
  4. Check for a filler or procedure published by the filler manufacturer for that exact pair.
  5. Make a test piece and break it or load it to see how it behaves before relying on the real joint.

For a project where metals are unknown, see welding project ideas for builds that use standard, known steel, which avoids many of these problems.

The complete guide to projects and repairs

Welding Project Ideas for Beginners and Hobbyists
Read the guide

Keep exploring

Guides from other topics

All topics →