Welding Careers

Types of Welding Used in Shipbuilding

Which welding processes shipyards use, from flux-cored and submerged arc to stick and TIG, plus what shipyard welders do and what F1 to F4 mean.

On this page
  1. Short answer
  2. Why shipbuilding welding is different
  3. Common welding processes in shipbuilding
  4. Specialised and automated methods
  5. Materials
  6. Should I use 6011 or 7018?
  7. What do F1, F2, F3 and F4 mean?
  8. What do shipyard welders do?
  9. Qualification and inspection

Short answer

Shipyards mainly use flux-cored arc welding (FCAW), submerged arc welding (SAW) and gas metal arc welding (GMAW/MIG) for the bulk of hull and structure welding, with shielded metal arc welding (SMAW/stick) for repairs and awkward spots, and gas tungsten arc welding (GTAW/TIG) for piping and thin or specialty materials. Exact choices vary by yard, ship type, material and the rules of the classification society or navy involved.

Why shipbuilding welding is different

  • Large amounts of steel: Hull plates, decks and bulkheads involve very long welds, so productivity matters.
  • All positions: Panels may be welded flat in a shop, but joining blocks and outfitting often means vertical, horizontal and overhead welds in tight spaces.
  • Strict rules: Structural welds are typically governed by classification society or navy requirements, with approved procedures, qualified welders, approved consumables and inspection.
  • Safety-critical use: Hulls and pressure piping must hold up to loads, fatigue and cold conditions.

Early all-welded ships in the 20th century had well-known brittle fracture problems, and that history is part of why materials, procedures and inspection are tightly controlled today. See the history of welding for background.

Common welding processes in shipbuilding

Flux-cored arc welding (FCAW)

Very common in shipyards because it deposits metal quickly, can weld in all positions with the right wire, and handles production work well. Gas-shielded flux-cored wires are widely used for hull blocks. Self-shielded wires are an option in windy outdoor areas.

Submerged arc welding (SAW)

An automatic or semi-automatic process where the arc is buried under a layer of granular flux. It produces high deposition and consistent quality on long, straight joints in the flat position, so it is common for panel lines that join large plates.

Gas metal arc welding (GMAW / MIG)

Used for production welding of steel and especially of aluminum in smaller vessels, high-speed craft and superstructures. A shielding gas protects the weld, so wind shielding is needed outdoors.

Shielded metal arc welding (SMAW / stick)

Slower, but flexible and simple. Yards still use it for tack welding, repair, awkward positions and places where bringing in wire-feed equipment is impractical.

Gas tungsten arc welding (GTAW / TIG)

Used where precision and clean welds matter: pipe root passes, stainless steel and aluminum piping, thin material and specialty alloys.

Specialised and automated methods

  • Electrogas and electroslag welding: Used in some yards for vertical joints on thick plate.
  • Stud welding: Attaches studs and fasteners to steel for insulation and outfitting.
  • Laser and laser-hybrid welding: Used by some modern yards for thin panels, reducing distortion.
  • Robotic and mechanized welding: Used on repetitive joints to increase consistency and speed.

Materials

Most hulls are mild or higher-strength shipbuilding steel. Aluminum is common in smaller craft, fast ferries and some superstructures. Stainless and other alloys are used for piping, tanks and special equipment. Each has its own filler metals and procedures.

Should I use 6011 or 7018?

For shipbuilding-type structural work, 7018 is generally the more common choice of the two. It is a low-hydrogen electrode, which helps reduce the risk of hydrogen cracking on thicker or higher-strength steel, and it produces a strong, ductile weld. 6011 is a cellulosic electrode that works on dirty or rusty metal and penetrates deeply, so it is popular for repairs and root passes in the field. But where an approved procedure specifies a consumable, follow that rather than personal preference. In class-approved work you generally have to use the consumable listed on the welding procedure specification.

What do F1, F2, F3 and F4 mean?

These are F-numbers from the ASME Boiler and Pressure Vessel Code, Section IX. They group filler metals by usability characteristics so that a welder qualified on one electrode may be qualified on others in the same group. For covered steel electrodes the groups are commonly understood as:

  • F1: high-deposition iron-powder electrodes (such as 7024)
  • F2: fast-fill mild-steel rutile electrodes (such as 6012 and 6013)
  • F3: fast-freeze cellulosic electrodes (such as 6010 and 6011)
  • F4: low-hydrogen electrodes (such as 7018)

Always check the current code edition and your procedure, as groupings and rules can change.

What do shipyard welders do?

Shipyard welders work with fitters, fabricators and inspectors. Typical tasks include:

  • welding plates, stiffeners and frames in panel and block shops
  • joining blocks during assembly in the dock or on the ways
  • welding pipe and pressure systems
  • repair and conversion work, including cutting out and replacing damaged steel
  • carrying out weld preparation, grinding and finishing
  • working with weld inspectors; see the certified welding inspector career path

Specialist divers also weld on hulls and offshore structures. See underwater welding.

Qualification and inspection

Shipyard welders are normally tested to a code or class rule before working on structure, and their welds are inspected visually and often by non-destructive testing such as radiographic, ultrasonic, magnetic particle or dye penetrant testing. To learn how qualification works in general, see how to become a certified welder.

The complete guide to welding careers

Is Welding a Useful Skill? Careers and Field Work
Read the guide

Keep exploring

Guides from other topics

All topics →