Gas and Forge Welding

Forge Welding in a Propane Forge

How forge welding works in a propane forge: heat, flux, joint prep, hammering, common problems, and how a gas forge compares with coal or coke.

On this page
  1. What forge welding is
  2. Why propane forges work for it
  3. Steps (prep, heat, flux, weld)
  4. Common joints
  5. Atmosphere and forge care
  6. Safety
  7. Related reading

What forge welding is

Forge welding is the oldest welding method. Two pieces of metal, usually steel or wrought iron, are heated until they are very hot but not molten, then placed together and hammered or pressed so they join. It is a solid-state process: there is no molten pool and no electric arc. It is used in traditional blacksmithing, for example in pattern-welded (“Damascus”) steel, in layered knife blanks, and in making welded rings, eyes and tool tips.

Why propane forges work for it

Many blacksmiths forge weld in coal or coke forges, but a well-built propane (gas) forge can do the job too. A gas forge is clean, easy to control, and heats evenly. Its fire is not as naturally “reducing” as a deep coal fire, so more care with flux and surface prep helps.

Propane is a fuel for the forge, not a welding process on its own; for how it compares with other gases, see do you use propane gas for welding. Most gas forges need a burner with a forced air supply to reach welding heat. Hobby builders often use blown burners, and the build quality of the forge and lining matters a great deal.

Steps (prep, heat, flux, weld)

  1. Prepare the surfaces. Clean the pieces of scale, rust and oil. Shape the mating faces so the centre makes contact first and squeezes out scale and flux toward the edges, for example with a slightly domed or scarfed surface.
  2. Bring the work to a yellow heat. The metal should be glowing bright. Exact temperatures depend on the steel; our article on what temperature you can forge weld steel at explains the ranges and the visual cues.
  3. Apply flux. Most smiths add borax-based flux at a lower heat, so it melts and coats the surfaces. See why use borax when forge welding for the reasoning.
  4. Return to welding heat. The flux should flow like water and the steel should look uniformly bright. Heating too fast can leave the outside hot and the core cold.
  5. Bring the pieces together and hit. Use firm, quick blows to start, working from the centre outward, then lighter blows as the work cools. Hammer or press promptly, because heat is lost quickly.
  6. Re-heat and check. Many welds need a second heat to finish and confirm the joint is sound.

Common joints

  • Scarf (lap) joint. The most common, with each end tapered so they overlap and blend.
  • Butt joint. Simple but the hardest to make strong, because there is less overlap.
  • Cleft (tongue and fork) joint. One piece is split and the other is wedged into it.
  • Stacked billets. Layers of different steels are welded into a block and drawn out, as in pattern welding.

Atmosphere and forge care

An atmosphere with too much oxygen makes scale form quickly, which makes welding harder. Many smiths run the forge slightly fuel-rich. Flux, particularly borax, can attack firebrick and other lining, so many smiths use a replaceable floor tile, a kiln shelf or a sacrificial brick under the work. Keep some distance between flux drips and the burner ports.

Safety

  • Use a forge that is built and ventilated properly. Combustion produces carbon monoxide, and an enclosed workspace should have good airflow.
  • Treat propane with care: check hoses and fittings for leaks, keep cylinders upright, and know where your shutoff is.
  • Wear safety glasses with suitable filter lenses for the glare, leather boots, natural-fibre clothing, and gloves.
  • Hot flux can spit. Keep spectators back.
  • If you are building your own forge, get advice from an experienced smith or a trained gas installer. Homemade gas equipment can go wrong in ways that are not obvious.

Forge welding is one of several ways gas fuel is used to join metal. For the torch process, read our gas welding overview. For a flameless approach used on rails, see thermite welding.

The complete guide to gas and forge welding

Gas Welding: How Oxy-Acetylene Welding Works
Read the guide

Keep exploring

Guides from other topics

All topics →